1. In order to maximize the acceptance of the signal from the satellite, the stand must be strictly vertical. Check it with a spirit level on all sides. 2. Point the antenna mplm to the satellite you want to take, by turning the clamps around the antenna mast. Use the compass to be directed precisely.
3. Set the elevation of the antenna, take that value of http://dishpointer.com/ Here you must specify your location, then set from the list of satellites that you want to take.
4. In addition to elevation, you can see a calculated value for LNB Skew (slope of the converter from the vertical), which will denote by X. - If the value X is negative - LNB must be rotated X degrees mplm naiztok. - If X is positive, the rotation is with X degrees nazapad. Loosen the mounting bracket of the converter so that it can be rotated. Turn slowly in the right direction to the adoption of maximum signal.
kingofsat.net - info frequencies SatcoDX mplm - Satellite table satbeams - map satellite coverage Feeds - current info satellites.xml generator dvb-bg forum dtv-bg forum vga-sat forum liveonsat.com - Football satellites USALS - comprehensive info Satellite Dish Pointer Satellite Antenna Alignment - useful soft satlex - interesting info magazine. TELE-satellite lyngsat.com - info frequencies flysat.com - info frequencies
Adoption of satellite TV receiver with a second dependent first
No comments:
Post a Comment